Fanvil POST Mode
Access Post Mode Process
Note: Please set the FTP server correctly and configure you PC IP is at range of 192.168.10.X before do the following steps.
- Use cable connect PC to LAN port of phone.
- Power off the phone.
- Press # and power on the phone until the LCD display POST MODE.
- On your PC, please telnet 192.168.10.1
- Configure page as below:
Post Mode Clear Configuration
Input 3 and enter for clear configuration:
Update Firmware in Post Mode
Note: Please set the FTP server correct before do the following step.
you can download wftpd32 from following link.
- Input 2 for update firmware
The server address is the IP of your PC.
The image name is the name of the firmware you place in FTP server directly.
Phone provides safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem.